My local sells offcuts for a flat $3.50 per pound 6061-T6. You have to
dig in the racks but I can usually find some piece fairly close to net
shape. A 6" square, 2" thick would be a bit under 7 pounds, would run
around $24 each.

I agree: a fabricated one sounds better.

wrote:
I need two pieces of aluminum 2" thick and 6" in diameter...or a
piece(s) I can get that size out of. If you have any; price to 76044?

These will be wheel spacers for a garden tractor so alloy or temper is
not important. I can find lots of 1" but the smallest 2" so far is 4'
x 6'.