Delta (34-444) and Vega Fence Setup
I purchased a 10 year old used Delta Contracter Saw Model 34-444. A
Vega U26 Fence came with the saw. I was checking the alignment of the
fence and noticed the following:
If I align the fence with the mitre slot, the fence is exactley
parallel. If I move the fence out to about 24" and measure from the
fence to the same mitre slot, the front and back measurements differ
by about 1/32". Could the rail be slighlty tweaked?
Is 1/32" an issue? If so, how do I fix it?
Thanks
Matt
|