220 V table saws and ground
On Dec 8, 1:07*pm, whit3rd wrote:
On Dec 8, 10:22*am, sibosop wrote:
I can just replace the two wire cord with a three wire
and hook the ground to some appropriate piece
of iron on the saw top.
That's not quite complete; you MUST connect the ground wire to the
box with the on/off switch, and the frame of the motor, and you
can then (if you want) bond the motor or switch to the tablesaw
top and/or frame.
Ok. Thank you.
Switch, Motor
Switch. Motor.
Switch. Motor
b
|