In article ,
Sylvia Else wrote:
In the example I posted earlier

http://members.optusnet.com.au/sylviae/crimp.jpg

note how the lug on the left has a different diameter where it's crimped
around the insulation to where it's crimped around the conductor. That
difference existed prior to crimping - the diameter of the hole for the
wire changes part of the way down the shaft so that insulation cannot go
any further.

It's true that this difference is not obviously reflected in the tool I
used, but given that plastic deforms much more easily than metal, I can
believe that having jaws the same size works out OK (it certainly seems
to), and has the advantage that there's no right-way around to insert
the lug into the tool.

IMHO, that type of crimp would require a special tool - not the generic
type for these pre-insulated connectors.

--
*Arkansas State Motto: Don't Ask, Don't Tell, Don't Laugh.

Dave Plowman London SW
To e-mail, change noise into sound.