b wrote in message
...
Hi,

I recently found this deck in a skip and after a belt change ti works
well. However, someone has been there before me and dismantled the
leverages/ linkages which activate the rec-pb mode slider switch. I
have one piece which was just randomly screwed onto the mech when I
found it (see final pic) and I think this is the main problem - I need
to reattach it properly.

pix:

Deck front: http://www.fileden.com/files/2007/6/...tc220front.JPG

Mech: http://www.fileden.com/files/2007/6/.../tc220rec1.JPG

Rod from main mech cam linked to loose moving metal parts which don't
appear to connect to anything :
http://www.fileden.com/files/2007/6/.../tc220rec2.JPG

The same metal parts, hanging loose:
http://www.fileden.com/files/2007/6/.../tc220rec3.JPG

another position of this loose metal part :
http://www.fileden.com/files/2007/6/...tc220rec3a.JPG

Piece as-found incorrectly screwed down :
http://www.fileden.com/files/2007/6/.../tc220rec4.JPG

.....anyone by chance have an exploded view or service manual?

many thanks!
-B


There is a hooked linkage like that, same holes and angles in the exploded
view of the TC FX330 -
if nothing emerged by Sunday I'll scan it in


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/