N_Cook wrote in message
...
More as a reminder to myself, for the next time this problem appears. A
work
around without having to cut into the existing cct to put in an inverter.
Use a small SPDT relay (+emf diode) with power adapted from whatever
convenient rail.
Permanent ground on the flexing ring contact in a 1/4 inch TRS socket and
the fixed ring- contact to the low side of the relay.
--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/
The added delay, due to relay action, only adding to the desired effect of
delaying the removal of the gain suppression until after tip contact is made
( unless someone is very slow at plug-in)
--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/