View Single Post
  #26   Report Post  
Posted to alt.home.repair
RicodJour RicodJour is offline
external usenet poster
 
Posts: 4,764
Default Paint matching (am I expecting too much...?)

On Nov 4, 10:59*am, N8N wrote:
On Nov 4, 10:45*am, Jim Elbrecht wrote:



On Wed, 4 Nov 2009 07:18:28 -0800 (PST), N8N
wrote:


On Nov 4, 7:53*am, "dadiOH" wrote:
Red Green wrote:
Like to add, when touching up even from an original can, blend/fog by
running the brush/roller virtually dry way past the area being done.
Differences are harder to notice.


IME and IMO this is the best solution for the OP assuming that the new paint
color is pretty close. *One can also feather out by diluting the paint.


It's not at all, that's the problem. *I've had three different batches
of paint mixed and only one was close enough to even try putting it on
the wall, and it is clearly different - patches look like shadows.


I guess I just don't repaint often enough-- or maybe too often-- but
in 50 years of home-owning and doing my own painting, I don't recall a
single time that I tried to paint part of a wall-- and only a handful
of times that I painted less than the entire room.


We bought a very old house a couple years ago, and the PO's repainted
before the sale - and they apparently were big fans of mounting stuff
on the wall (e.g. mirrors etc.) and were NOT big fans of removing
things like light fixtures, mirrors, switch plates, etc. when
repainting. *So for an example, when we had air conditioning installed
and had the old round thermostat replaced with a new programmable one,
there was an ugly exposed area of old paint, mounting holes, etc. left
behind with a big ridge of brush marks showing the outline of the old
thermostat. *Likewise, they'd glued pieces of mirror on the wall in
the living room to conceal the old electrical boxes for wall sconces;
when I ripped those down to install new sconces I've got more
ugliness. *(but I still have to take the big mirror - mounted like a
bathroom mirror, with clips - down over the mantel, which will cause
another big mess-o-ugliness) *In each case there's enough brush marks,
holes, etc. that most of these areas get a skim coat of drywall mud,
primer, etc.

Once I've got enough of these really egregious trouble spots done,
then we'll likely go ahead and repaint whole walls or rooms, but I'm
just trying to keep the house from looking like a perpetual
construction site while this is going on.


In that case just pull paint patches all over the wall and tell people
it's Venetian Plaster. They'll go, "Ooooh!" and you'll wink at the
wife.

R