"Vic Baron" wrote in message
...


"John Grossbohlin" wrote in message
...

"Vic Baron" wrote in message
...
Just picked up one of these at a sale and have a few questions.

It's in relatively good condition but I plan on giving it a thorough
tuning. I'm puzzled about the plane iron though - it appears that it has
been ground in a slight arc across the cutting edge as opposed to a 90
degree cut. Is this normal for these planes? I've seen some planes with
a curved blade before but wondering what effect it will have if I grind
straight across.

2nd item - Although it's relatively rust free, the japanning is chipped
in quite a few places. Having it re-japanned ( is that a word??) is not
a viable option as is trying to do that myself. What might be a good
alternative - I was thinking some sort of epoxy paint. Any ideas?


A slight camber on the iron is useful for correcting out of square
conditions and it keeps the corners from leaving tracks. By slight we're
talking about 1/64" at the ends as compared to the middle.

Personally, for a "user" vs. a decoration I wouldn't bother with fixing
the Japanning... but that's me.

John

Thanx John - Actually I agree about the japanning. I'll just clean it up
and leave it.

The iron isn't rounded at the corners, it's a smooth arc from side to
side. I'll grind it square and round the corners as I usually do. Just
wasn't familiar with this plane and wanted to be sure the arc wasn't a
design function.

The smooth arc is what you want... that way with a fine setting the corners
are inside the body of the plane and don't dig in.

John