On 19 Oct, 22:25, Colin Wilson
o.uk wrote:
The whole lot came from B+Q (often an error but they had a good offer
when I bought it!) and was branded 'Tile-it'. *They don't sell that
range any more (I wonder if that means something), but I've tracked
the programmer down as an Aube TH132 (
http://www.aubetech.com/search/index...mostats&recher....
I had what I think was the exact same problem with the same timer -
it's a faulty timer, and there's nothing you can do to get it going
again.
On the bright side, it's made by Honeywell, and they offer something
like a 3 year warranty, and mine was swapped out without any problems
at all.
Their (and my) email follows below...
-----
Hi,
The problem is in the back housing not the front one.
I suggest that you replace both modules anyway.
If you have any problem exchanging it locally, contact me back and we
will find a way to send you a replacement unit.
Do not hesitate to contact me back if you have any question.
Best regards,
Martin
* * * * * * * * * * Honeywell
Martin Isabelle
Spécialiste Support Technique Sénior
Specialist Tech Support Senior
T. 1-450-358-4600 ext. 242
F. 1-450-358-4650
E. *
-----Original Message-----
From: Colin Wilson
Sent: 18 février 2009 16:11
To: Service Account (QB19)
Subject: TH132 series / problem
I've got a TH132-AF *controlling my underfloor heating but it
appears to have a slight problem - when the load switches in,
the display blanks, and it appears to lose time constantly.
While I don't think i'll have any problems getting it replaced
by the supplier, i'm wondering whether they'll need the base
as well as the removable programmable front (I don't know which
part the voltage regulation circuit is in for the controller).
Suggestions welcome :-}
Thanks
Thanks Colin - exactly the same symptoms by the sound of things, as
you say. I'll give them a go. I didn't realise it was a Honeywell
though - they didn't come up on any of my web searches for the TH132.
Guess all these things get mutliply re-badged....
Cheers
GMM