Thread
:
PM 3055 scopes do not power up
View Single Post
#
2
Posted to sci.electronics.repair
Samuel M. Goldwasser[_2_]
external usenet poster
Posts: 224
PM 3055 scopes do not power up
(Samuel M. Goldwasser) writes:
Someone asked me about these oscilloscopes. Apparently he has a dozen
of them that do not power up. No display or backlight on the LCD. Yes,
AC power is set correctly. I haven't seen them so don't really have any
more info.
Anything common with these?
Should have mentioned that these are Philips analog scopes in case
the model is ambiguous.
--
sam | Sci.Electronics.Repair FAQ:
http://www.repairfaq.org/
Repair | Main Table of Contents:
http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ:
http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites:
http://www.repairfaq.org/REPAIR/F_mirror.html
Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
Reply With Quote
Samuel M. Goldwasser[_2_]
View Public Profile
Find all posts by Samuel M. Goldwasser[_2_]