T handle torque wrench
"MiamiCuse" wrote in message
...
If I have a torque wrench that works for a 5/16" hex head, but now I have
a
hex head that is 3/8" in size, is it possible to use the same torque
wrench
with some sort of an adapter?
I went to the big box store looking for an adapter but I could not find
one.
I have a set of sockets that includes a 3/8" head but that would not help
me
in using that T handle torque wrench that would release at 60#-in.
I seems I need a piece that on one end it is a 5/16" hex head and the
other
side is a square head to insert into my 3/8" socket. Is there such a
thing?
Thanks in advance,
MC
OK here is your kluge. Use a 5/16 Allen head socket backwards in your
torque wench, now you have a female 1/4" hole you fill with a short piece of
1/4 square stock. Now use a 3/8" socket and you are in business. You might
want to tape all the little bits together.
--
Roger Shoaf
About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.
|