View Single Post
  #11   Report Post  
Posted to rec.crafts.metalworking
Steve W.[_4_] Steve W.[_4_] is offline
external usenet poster
 
Posts: 1,705
Default not quite OT, and almost metal related - best goop to removecarbon deposits

Bill Noble wrote:

snip---------

. Run it a bit until the smoke clears up, then change out the
oil/filter, you may want to do this again after a couple days. There
will be a LOT of carbon and crud flushed into the oil.



--
Steve W.


just one more thought - 12 quarts of mobile 1 at $6 per quart, plus two
oil filters at about $15 each, plus removing inner fender and sill plate
and several hoses to change filters and get at both drain plugs = I
don't want to do it "again" after a few days - which is another reason
to keep the magic goop out of the engine internals and just let it work
on the carburized passages.


You don't have to use mobile 1 for the flush oil. Use the cheap stuff
and then change to the mobile 1.


--
Steve W.