View Single Post
  #6   Report Post  
Posted to rec.crafts.metalworking
Bill Noble[_2_] Bill Noble[_2_] is offline
external usenet poster
 
Posts: 943
Default not quite OT, and almost metal related - best goop to remove carbon deposits


snip---------

.. Run it a bit until the smoke clears up, then change out the
oil/filter, you may want to do this again after a couple days. There
will be a LOT of carbon and crud flushed into the oil.



--
Steve W.


just one more thought - 12 quarts of mobile 1 at $6 per quart, plus two oil
filters at about $15 each, plus removing inner fender and sill plate and
several hoses to change filters and get at both drain plugs = I don't want
to do it "again" after a few days - which is another reason to keep the
magic goop out of the engine internals and just let it work on the
carburized passages.