"Mark Zacharias" wrote in message
...
"rb" wrote in message
...

"Mark Zacharias" wrote in message
...
"rb" wrote in message
...
Sony KLV-40U-100M has no display.

Powers up green panel light is on and so are the back lamps.

No display from any of the inputs.

Any thoughts or tips on this set?

Thanks...........



Gotta be the main board - there isn't much else...

This board is actually a high-failure item. Replaced one just last
Saturday. The normal failure mode is the set just sits there dumb, and
won't turn on at all. One confirms the standby voltage to the main
board, and note that the turn-on signal is absent coming from the main
board back to the power supply.

Your failure seems different but I'm still betting on the main board.

Mark Z.

I agree it is a problem on the A board.
I was hoping to just repair the component that is bad.
All caps tested Ok with and esr meter and diodes test ok also.
What did the board cost ,and did you order from Sony?
Thanks..


Don't remember the cost exactly - it was 200.00 or so but also with a
large core value - perhaps 380.00 or so IIRC. We get them from Sony.
Dealer pricing is available from other distributors - but you'd have to
pay the core up front and get refunded when you return it.

Mark Z.


You know - this could be a bad T-conn. With the set powered on try slightly
loosening and rocking the connector to the T-conn and see if the screen
flashes or blips or shows any sign of activity. If not, the T-conn board is
probably bad. It's not available separately for this model. The panel would
have to be replaced.

Mark Z.