View Single Post
  #7   Report Post  
Posted to rec.crafts.metalworking
Gunner Asch[_4_] Gunner Asch[_4_] is offline
external usenet poster
 
Posts: 2,502
Default OT - question about B&S OHV engine

On Mon, 31 Aug 2009 11:58:16 -0400, Bob Engelhardt
wrote:

Denis G. wrote:
For the sake of saving space in my shed, I made the mistake of hanging
my Honda lawnmower on the shed wall for the winter so that the
normally vertical engine was horizontal. The carb flooded with oil.
After cleaning and reassembly, it ran fine


I've had that happen too. The oil comes through the PCV valve & hose,
into the carb. What a mess.

I'm pretty sure that wasn't what happened to this engine though. First,
the PCV hose didn't have oil in it & second, the carb float bowl had oil
in it & that wouldn't happen if the oil came from the PCV valve (it
would have to flow down the main jet & I don't think that it would do that).

Anyhow, it's cleaned up & running now. But still a Mystery.

Bob



Perhaps someone tried to run it with an old old can of 2 cycle oil
premixed and the gas had evaporated?

Gunner

Whenever a Liberal utters the term "Common Sense approach"....grab your
wallet, your ass, and your guns because the sombitch is about to do
something damned nasty to all three of them.