-------------------------------------

I have a honda mower model HRT216SDA.

I replaced the transmission and clutch arm because the clutch arm was
worn as well as the tip that extends up from the transmission where the
clutch arm attached as well as installing a new belt.

The problems is when I pull the drive control cable the wheels will turn
but it has no pulling power.

I can see the cable move and when I lift the real wheels off the ground
the wheels turn, but as soon as I put the wheels back on the ground the
mower will not move.

Before reinstalling I checked the gears in the wheels as well as the
pinion gears and could see no wear.

Any help would be appreciated




##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 370633 messages and counting!
##-----------------------------------------------##