Arfa Daily wrote in message
...

To the others in the thread , if I wanted to get hints on
(apparently
,
oftn
walletctomy) buying specific replacement stuff from e-bay or how to
google
I
wouldn't be posting repair queries to sci.electronics.repair which
has
the
word repair in the title. Why do you think I deliberately did not
mention
make and model?



Sometimes, my friend, you don't do yourself any favours. With an arsy
attitude like that, you don't deserve to get help with your half
baked
bodge
repair projects. I offered you a solution based on the activities of
a
friend who is a proper professional at laptop repairs, that would not
have
cost you a lot of money, otherwise he wouldn't be doing it, as he
makes
a
proper living at it, and I wouldn't have suggested it to you, knowing
your
penchant for fixing everything with some **** dissolved in epoxy, and
some
obscure material not intended for the job. So go ahead, and waste
forty
quidsworth of your time, on a bodged repair that won't last five
minutes.
Sheesh.

Arfa



Oh well said that man -

Ron


If I replaced the whole hinge, I'd have to find out how to take the
laptop
apart to get to the other part of the hinge, C-clip or whatever is
buried
inside. Anyone's guess what chance of colateral damage just doing that.
Obtain a part, without being ripped off and having the correct one
supplied.
Whereas all I've to do is find a way of building up the lost few square
mm
of aluminium of the hinge anchor plate and make good some of the broken
away
and missing plastic of the display surround/lid. All nicely exposed and
easy
to work on. Why go to all that bother if a bit of epoxy and some Al
mesh/
minimal hardware/drilling is all that's required. The hinge mount failed
in
quite normal use , so direct replacement likely to do the same.



Because, when you are doing work for people who are good enough to entrust
their repairs to you, it's about both appearing to be, and *actually
being*
professional about the way you tackle the job. I wonder how you would feel
about a garage that fixed your clutch cable by joining it with an
electrical
junction block, rather than replacing it, because the bodge was cheaper
and
easier to do ?

Honestly, I don't know how you manage to make a living judging by some of
the threads you post on here. Yes, you are right that the title of this
group includes the word "repair", but I can't believe how literally you
seem
to take that. Repairing often involves fitting new genuine replacement
parts, and especially it does when you are doing the work commercially ...

Arfa

Arfa




I get the customer self-referals from my local "commercial " outfit, no name
mentioned. Customers charged 20 GBP up front, no refund. If its changing a
switch , gain pot, jack socket they go ahead and do that and charge extra.
If it requires diagnosis of a proper electronic, rather than self-evident
mechanical fault ,they hang on to it , return it 3 months later, saying they
cannot get the parts, 20 squid , that'll do nicely.