"N_Cook" wrote in message
...
Jeff Liebermann wrote in message
...
On Sun, 9 Aug 2009 22:36:54 +0100, "N_Cook" wrote:

Any general tips on how to make a structural repair to the broken and
missing Aluminium extension from the friction pintle mount to where it
joins
the plastic of the LCD surround ?

No, I haven't the slightest idea, especially since you didn't bother
supplying the manufacturer and model number.

If you're missing parts, you can find just about anything from various
online computer salvage operators. Also on eBay. Be prepared to
overpay. The few surviving repair shops that actually do their own
repair usually have a fair collection of scrap parts laying around.
Ask, and you might receive.

Fractured at the screw point so only half
the screw hole remains , a highly stressed point, going by the amount of
force required to turn this pintle rod.

I've used hili-coil inserts to fix those. Also threaded brass inserts
commonly used in plastic molding. Drill it out and epoxy the insert
inplace. The smallest you can get is 4-40 which is a tolerable
substitue for the common 3mm metric screw. I've also mixed aluminum
dust with epoxy and built up the broken part sufficiently to thread
the hole. It worked, but the owner had to be very careful when
opening the hinge. It lasted about 3 years, which isn't too horrible.
All these methods were a PITA and far too much work. If it ever
happens again, I'll just epoxy the hinge to the base metal and be done
with it.

You might want to look at hints at:
http://repair4laptop.org
This looks close:
http://forum.notebookreview.com/showthread.php?t=86297

Incidentally, such breakage usually happens because the screw wiggles
loose. I recommend Loctite on enything threaded into aluminum.

--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Thanks for some interesting ideas. I was thinking of using some expanded
aluminium, anchored into the aluminium, with a fresh drilled small hole or
two and small nut/bolts. To give a scaffold for epoxy to anchor onto. Also
underscore the plastic to give a bit of key. What is the function of
aluminium dust in epoxy, other than a colourant?


To the others in the thread , if I wanted to get hints on (apparently ,
oftn
walletctomy) buying specific replacement stuff from e-bay or how to google
I
wouldn't be posting repair queries to sci.electronics.repair which has the
word repair in the title. Why do you think I deliberately did not mention
make and model?



Sometimes, my friend, you don't do yourself any favours. With an arsy
attitude like that, you don't deserve to get help with your half baked bodge
repair projects. I offered you a solution based on the activities of a
friend who is a proper professional at laptop repairs, that would not have
cost you a lot of money, otherwise he wouldn't be doing it, as he makes a
proper living at it, and I wouldn't have suggested it to you, knowing your
penchant for fixing everything with some **** dissolved in epoxy, and some
obscure material not intended for the job. So go ahead, and waste forty
quidsworth of your time, on a bodged repair that won't last five minutes.
Sheesh.

Arfa