pdq911 wrote:
My excell 2500 power washer just stopped working while I'd been using it
for an hour. The engine continued to run, but there was absolutely no
pressure coming out. I could put my finger over the open end of the
pressure washer and keep any water from coming out. I've removed the hose
and verified there's no obstructions and i have good water pressure from
the house...Could it be my pump is bad? I did notice 2 things after it
stopped providing pressure....my son had turned on the hot water on so I'd
been washing with pure hot water prior to the failure, and the 2nd thing I
noticed was a sucking noise coming from the nozzle for the soap hose
(located on the inlet connection)

any suggestions would help before I take it to the local true value for
repair.

Thanks, Pete

-------------------------------------




##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 368059 messages and counting!
##-----------------------------------------------##
Hi,
Sounds like your washer intestine melted by hot water.