I thought of that but the router must attach to the FMT and I don't
think a dremel would attach correctly.
According to the leigh manual it is a milling bit for metal. I've found
some end mills down to 1/32 but the
shank is 1/8th. I've found a collet to step 1/8th up to 1/4 but that
adds more than $20 to the cost. Leigh
says they can buy the bit they use locally in BC.
Robin Lee wrote:
William -
We go down to 1/16 -
http://www.leevalley.com/wood/page.a...6168,46171&abs
page=1&ccurrency=2&SID=
Have never seen a 1/32 bit for a router...
Best bet would be to look at a dremel, with router attachment...
Cheers -
Rob Lee