David wibbled:

Very interesting, got any piccies?

Finally:



One paint job on Owen's room: Matt emulsion makes light of my imperfect
plastering - can hardly seen anything wrong under normal lighting

http://photos.dionic.net/v/public/bu..._0010.jpg.html
http://photos.dionic.net/v/public/bu..._0009.jpg.html



Marmox board (12.5mm) bonded to the floor screed with Mapei KaraQuick:

http://photos.dionic.net/v/public/bu..._0006.jpg.html
(Patches are silicone sealant - suggestion on Marmox's website was to apply
silicone to the board edges for a more damp proof seal. This turned out to
not work well. Easier to apply silicon to gaps afterwards.)


Taped in addition, on advice from Marmox Tech Support - this, together with
the silicone garantees a vapour impermeable floor:

http://photos.dionic.net/v/public/bu..._0014.jpg.html


Treadair Boardwalk underlay (4mm) foam laid. The foil layer is also a vapour
barrier, so despite our slightly damp floor, I'm confident nothing is
getting though this lot:

http://photos.dionic.net/v/public/bu..._0016.jpg.html


Kahrs engineered click boards going down. This was easy enough:

http://photos.dionic.net/v/public/bu..._0020.jpg.html

And completed, with another wipe over with their oil refresher liquid:

http://photos.dionic.net/v/public/bu..._0032.jpg.html



Front room scabbled:
http://photos.dionic.net/v/public/bu..._0024.jpg.html
http://photos.dionic.net/v/public/bu..._0025.jpg.html

And a close up of the fairly fine finish:
http://photos.dionic.net/v/public/bu..._0026.jpg.html


New improved brickwork on left of door with new door casing wedged in for
sizing.

http://photos.dionic.net/v/public/bu..._0034.jpg.html
http://photos.dionic.net/v/public/bu..._0036.jpg.html

(Door casing has a slight bow - this will straighten up once screwed to
wall).



I'll raise a couple of questions in a new thread...

Cheers

Tim