John Rumm wrote:
The Medway Handyman wrote:
John Rumm wrote:
Clot wrote:
F wrote:
On 13/07/2009 23:51 Clot wrote:
Seconded. For "grout scraping out tool" read suitably sized flat
bladed screwdriver used edge on. Done many this way over the
years. Angle grinder any use?
Fein Multimaster (or clone) with a carbide or diamond segment blade
makes de-grouting easy.
Don't know about the Fein, but the Bosch carbide blade is rather
thick & can't be used on narrow grouting without damage to the tiles.
One needs to check first obviously - but its ok on 3mm lines.
For a comparison against a 2p, see:
http://www.internode.co.uk/temp/carbide-ss-face.jpg
http://www.internode.co.uk/temp/carbide-ss-side.jpg
I'll measure a Bosch blade when I get a mo, but it seems thicker.
--
Dave - The Medway Handyman
www.medwayhandyman.co.uk