The Medway Handyman wrote:
John Rumm wrote:
Clot wrote:
F wrote:
On 13/07/2009 23:51 Clot wrote:

Seconded. For "grout scraping out tool" read suitably sized flat
bladed screwdriver used edge on. Done many this way over the
years. Angle grinder any use?
Fein Multimaster (or clone) with a carbide or diamond segment blade
makes de-grouting easy.

Don't know about the Fein, but the Bosch carbide blade is rather thick &
can't be used on narrow grouting without damage to the tiles.

One needs to check first obviously - but its ok on 3mm lines.

For a comparison against a 2p, see:

http://www.internode.co.uk/temp/carbide-ss-face.jpg
http://www.internode.co.uk/temp/carbide-ss-side.jpg

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/