Thread
:
Wiring in conduit
View Single Post
#
86
Posted to alt.home.repair
[email protected]
external usenet poster
Posts: 18,538
Wiring in conduit
On Tue, 30 Jun 2009 20:43:36 -0600, Tony Hwang
wrote:
wrote:
On Tue, 30 Jun 2009 13:05:46 GMT,
(Doug Miller)
wrote:
In article , JIMMIE wrote:
Please show me where I said 2 amps, I'll send you a dollar..
http://groups.google.com/group/alt.h...c1b2922e1bd483
"The problem is that solder will melt with just a few amps of current passing
through it."
That simply isn't true.
Yes the
NEC permits soldering but unless you are extremely competent at it its
a bad idea. [more nonsense snipped]
That isn't true either. If a soldered joint can be "ripped apart" as you
described, then it wasn't properly mechanically secured -- which means the
joint wasn't any good *before* it was soldered.
Training involved soldering "western union" and "linesman" splices,
which the instructor then attempted to dissassemble with a linesman's
pliers. When dissassembled you could easily see how well the solder
had penetrated and wetted the conductor - right through the joint.
It was common practice - just like welding training involves
fracturing the weld to see how good the weld penetration was.
hi,
As a result of poor soldermanship(?). I was mil-spec. soldering
certified by U.S. DOD in my working days. I never made a solder joint
like that. Simply it couldn't happen!
Even a perfectly soldered western union splice CAN be dissassembled.
Not easily - for sure.. Solid wire, of course.
Reply With Quote
[email protected]
View Public Profile
Find all posts by
[email protected]