On Sun, 31 May 2009 12:37:07 -0400, Richard Evans
wrote:

I'm rerouting some wiring in my garage, which necessitates removing
the staples that hold it in its current configuration. I've been using
a flat pry bar with some success (defined as "Got the staple out
without gouging clean through to bare wire.") but I'm wondering if
there is a tool specifically made for this task.

http://www.electricsupplyonline.com/...-8_w001447.php

The tool is curved. You pinch the staple or nail, and use the curved
part as a lever to pull them right out.