"Todd Rich" wrote in message
...
I've got a project that is calling for internally and externally threaded
stainless tubing. I'm having a hard time finding what I need, so I
thought I'd ask here before I draw up a plan and get a quote from a local
machine shop.
What I need is something like this:
| \\ | | // |
| // | | \\ |
| \\ | | // |
| // | | \\ |
With the inner hole on the externally threaded tubing being .055-.070 and
the thread size being 8-32 (one size up or down would be fine, but 10-32
is pushing it) and the OD of the internally threaded tubing being about
1/4". I need them about 1/2" long, though longer is fine, as I can cut
them down to size.
I'm looking for about 300-500 of each.
Thanks for any help!
Also, I'm looking for either split brass tubing, or bead rolled brass
strip. It need to go on/around 22ga stainless. Say between 1/8"-1/4" OD.
The final effect is something like this:
http://www.sunshadowdesign.com/galle...et/duncan2.jpg
(Not my work, just found something of similar style)
Thansk again!
Todd
Isn't what you are describing called a "thread repair insert"?
Ivan Vegvary