On 2009-05-09, Ignoramus11970 wrote:
On 2009-05-09, Mike Henry wrote:
Igor,

I've been using Hangsterfer S500 for a couple of years now and the first
batch is still odor free and I've never aerated it. It's sitting in a
bucket, gradually evaporating the water off before disposal. I use it at
5% - I can give you a sample if you need enough to make up 5-gal or so of
diluted coolant. The stuff costs around $125 for 5 gallons so it's a good
idea to make sure you like it before you buy.

Mike, I am just about done pumping out the coolant, rinsing, rinsing
with Clorox, rinsing several times more etc. After another hour or so,
the lathe would be clean and totally dry inside and out.

Do you have a high intensity UV source? If so, giving the
interior a half hour of illumination from that (keeping the kids away,
of course) would perhaps zap the last bugs.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---