View Single Post
  #19   Report Post  
Posted to alt.home.repair
willshak willshak is offline
external usenet poster
 
Posts: 3,482
Default how do I install fence posts?

on 5/6/2009 10:51 PM (ET) TimR wrote the following:
I need to put up a fence for our puppy.

I plan on 4x4 PT posts, 4 feet above ground, 2 feet below.

I'm getting conflicting advice on concrete vs gravel vs just tamp the
dirt really tight. One expert even recommended concrete in buckets.
There seem to be several successful methods.

I want the posts to be removable eventually, for repair or moving the
fence area. So if concreted in, I'd want them to not be stuck to
it.

What do you think?

And yes, I know to call Miss Utility before digging.


And check with the building inspector for set back ordinances.
I had a fence company install a fence with PT posts and 8' wide by 6'
high panels around my inground pool. No gravel or concrete in the post
holes except for the corners and gate posts. It's still up 22 years
later. I'm in NY so the depth of the holes were 4' deep.

--

Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @