Dear Friend,

If you realy like to troubleshoot follow the steps listed below.

1. Check the AC plug and the cables for loose connections.
2. Switch off or pull out wall outlet power.
3. Remove the back cover of the TV.
4. Very Carefuly see any loose connection or anything strange.
5. If you are not a technician then you have to note down all the wire
position numbers and locations of the board.
6. Pull out all the cable and wires and remove the Main Board Out very
Carefully.
7.Clean the board with a brush.
8. Turn the board to soldering side (Down Side) look very closely for
possible dry joints.
9.If Yes you have to solder those points very carefully.
10. If you are not sure then take a Electronics course from
http://www.go1.web.officelive.com or write to me seperatly for help.


See you online.
GO1.WEB Team http://www.go1.web.officelive.com