On 2009-01-20, RedDwarf wrote:

I built this shed in the backyard, it has a dedicated 20amp GFCI
circuit running to it. Once inside the shed (it comes in from the
floor) I have it hit a junction box and branch out to the various
spots i need it (outlets/lights etc.).

My question is, do I HAVE to run the wire through the studs (drilling
a lot of holes because studs are 16 on center)? or can I run it on the
surface of the wood, near the top sill?

Well, if you are using Romex, you have to cover it with a 15 minute
fire barrier such as drywall. [See NEC 334.10(3)] That will be a lot
easier if you drill the studs. :-)

Cheers, Wayne