View Single Post
  #11   Report Post  
Posted to alt.home.repair
[email protected] amyl@paxemail.com is offline
external usenet poster
 
Posts: 5
Default Copper Pipes / Electrical Panel Clearance

On Jan 11, 1:39*pm, (Doug Miller) wrote:
In article , wrote:



On Jan 10, 11:15=A0pm, "Ed Pawlowski" wrote:
"RBM" wrote in message
...


The NEC requires three feet clear working space in front of a panel. An
electrical inspector can make exceptions if there is a hardship, but your
situation sounds like laziness on the part of a plumber


Not enough details to make a statement like that. If, by in front, he means
it runs across the ceiling and the box is a couple of feet below it mounted
to the wall, I don't see any laziness. A better description or photo would
help.


For clarification the panel is mounted on the wall. *The pipe runs
parallel to the box but 1.5 feet in front of in. *So if you were
standing in front of the panel looking directly at it the pipe is
above your head (not over the panel).


Hope this helps,


No, it does not help. You still haven't told us what the height of the pipe
is, either above the floor or relative to the height of the panel. "Over
your head" is not an adequate description: what's over *your* head might not
be over *mine*.


Sorry, the pipe is mounted to the basement (non finished) rafters.
The approx height of the joist is 7ft. The pipe is mounted to it - so
that makes the pipe arond 6' 10".

The electrical panel is approximately 1 foot below the ceiling.
However, all the wires extend out from the top into the ceiling to
various locations in the house.

Amy.