View Single Post
  #10   Report Post  
Posted to alt.home.repair
Tony Hwang Tony Hwang is offline
external usenet poster
 
Posts: 6,586
Default Programmable Thermostat

RLM wrote:
On Tue, 06 Jan 2009 08:49:36 -0500, mcp6453 wrote:

The programmable thermostat on my upstairs Comfortmaker heat pump has
started acting strangely. It's made by Totaline. In normal operation,
when it is being programmed, certain numbers or digits (temperature,
heat, cool) will flash to indicate which parameter is being set. After a
few seconds, the flashing stops to indicate that the control is no
longer in the programming mode. The problem with my unit is that it
sometimes continues to flash.

I've removed and restored power to the thermostat and to the heat pump
to try to reset the unit. Neither has helped. My guess is that the unit
is defective. (I cannot find a reset button.) The biggest problem is
that when a time-of-day setting is activated, such as changing the heat
from 69 to 72 degrees at 6:00AM, the heat does not kick in.

I cannot find a model number anywhere on the unit. It looks almost
exactly like the "Gold Programmable" on page 4 of the Totaline brochure
at http://www.totaline.com/dl/570-484.pdf, meaning that it may be a
Model P274. How can I find out which unit is the correct replacement? I
want to replace it myself. The heating and cooling stages don't mean a
lot to me. The heat side has emergency heat and normal heat (is that two
stages?) As far as I know, the cooling is only one cycle. Am I going to
have to get the model number of the heat pump to get the specs, or is
there another way to characterize the unit?


Have you removed the cover of the thermostat and replaced the battery. My
Dad called me once and was ready to replace his heat pump because of one
of these digital thermostats had a battery inside. He replaced the battery
and all was well. He didn't know that a battery run the memory.
Just a thought.

Hi,
When batteries need replacement it'll give plenty of warning displaying
flashing letters "Batt" Programmed setting is stored in the NV memory
and dead batteries won't erase it. You can either set it to dactory
defaulr setting or reprogram it any way you want. Some one mentioned Day
light saving time change. Mine has a button wich moves clock one hour
back and forth.