On Sat, 8 Nov 2008 06:22:24 -0800 (PST), "
wrote:

More recently, I took the plunge an bought the 12" Bosch SCMS and the
bosch bench for it.

http://www.toolstop.co.uk/?option=sh...FRyB1Qod81ppPQ

This is sufficient to support 4.8m timbers, and because the timber
supports (one either end) and the saw are all on a common base - it's
all completely level and square.

I can't see how is sufficient for 4.8m timber, it's just 3.7m long or
1.85m either side of the saw line. If lopping off say 100mm from a
4.8m length there will be 2.85m overhanging the end of the left hand
support, more than enough for it to overbalance the free end.


--