On Tue, 28 Oct 2008 19:41:49 -0700, "Michael Koblic"
wrote:

Also, Morse taper shanks with a soft and unmachined ends cost less
than $10 each and are suitable for making special cutter holders for
boring heads and fly cutters.
see
http://littlemachineshop.com/product...2393&category=
{also available in #2MT}

also see
http://littlemachineshop.com/product...2231&category=

http://littlemachineshop.com/product...1609&category=
http://littlemachineshop.com/product...1608&category=
{other fractional/metric sizes available but 3/8 and 1/2 will
cover almost all the endmills you will ever use}


Unka' George [George McDuffee]
-------------------------------------------
He that will not apply new remedies,
must expect new evils:
for Time is the greatest innovator: and
if Time, of course, alter things to the worse,
and wisdom and counsel shall not alter them to the better,
what shall be the end?

Francis Bacon (1561-1626), English philosopher, essayist, statesman.
Essays, "Of Innovations" (1597-1625).