Ignoramus8122 wrote:

Found a die lift table today, 1,000 lbs capacity, it has four threaded
posts, similar to this lift:

http://www.chdist.com/material-handl...3150-5069-1061


Good find. Rework it a bit with a larger base footprint and make a
~4'x6' top surface out of two layers of 3/4" birch ply topped with
laminate and edged with oak. Makes a very good all around work table for
the shop that you can adjust to the optimum height for the project
you're working on. I made a similar work table from a 1,000# cap power
adjustable height frame I found surplus for $50.