View Single Post
  #2   Report Post  
Posted to uk.d-i-y
The Natural Philosopher The Natural Philosopher is offline
external usenet poster
 
Posts: 9,045
Default How to improve effectiveness of fireplace - fit a woodburningstove?

Simon wrote:
One of my relatives uses an open fireplace for heating during the winter,
using a mixture of coal and wood. The wood is effectively free. The
fireplace doesn't seem to produce a lot of heat, and I've read that a
woodburning stove might be much more effective, by virtue of drawing less
cold air into the house and sending less heat up the chimney. I have some
questions:

The regularly-swept chimney copes fine with the mixture of wood and coal
burnt in the fireplace, so is it likely be be OK with a wood stove, if
suitably connected? The house is about 20 years old.

The house is in a rural area, but there are a few houses nearby. Is the
exhaust from a woodstove likely to cause more nuisance to them than that
from the fireplace?

An ideas where I can get a cheap stove? I'm hopefully monitoring my local
Freecycle group, but I guess recent energy price rises have made wood stoves
very sought-after.

Any other things worth trying?


Stoves are more efficient really due to the longer path the flue gases
take through the structure, and the more surface area of the structu
our open fires take hours to really heat a room, because there is a mass
of about 15 tonnes of masonry and the like that needs to get warm
first..but they heat the room for about 12 hours after the fire goes out!!

Stoves, drawing less air into the flue, (can) run the flues a lot
hotter. Regulations insist that even a decent existing open fire flue be
lined..and this will cost you the bets part of a grand I am afraid.
Consult your BCO for details..