On 2008-09-04, Terry Coombs wrote:
Ignoramus27629 wrote:
On 2008-09-04, Larry Jaques novalidaddress@di wrote:
On Wed, 03 Sep 2008 18:48:51 GMT, with neither quill nor qualm, Grant
Erwin quickly quoth:
Ignoramus27629 wrote:
On 2008-09-03, Grant Erwin wrote:
Ignoramus27629 wrote:
I cut most stuff with my mill these days.
How?
Let's say that I want to cut a pipe, I put it in a vise and cut it
with an endmill.
So you have e.g. a 1/2" kerf?
I'm just asking - unlike other posters I'm trying very hard to be
friendly and keep the spirit of community alive.
I saw the metal-cutting table saw at HF today, on sale for $80.
That leaves only a 1/8" kerf and is likely MUCH quicker.
And a lot noisier.
I gotta say , my $75 pawnshop portaband (with mods for vert use) is
quieter than my mill , gives less waste , and is lots quicker ...
What kind of mill do you have?
--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/