View Single Post
  #30   Report Post  
Posted to rec.crafts.metalworking
Gunner Asch[_4_] Gunner Asch[_4_] is offline
external usenet poster
 
Posts: 2,502
Default Homelite ST175 String trimmer parts?

On Wed, 27 Aug 2008 00:22:06 -0700, Bruce L. Bergman
wrote:

On Tue, 26 Aug 2008 12:25:35 -0700, Gunner Asch
wrote:

Its a bent flex shaft. Shrug...I have no need of an industrial string
trimmer, there is so little vegitation here that Ive managed for years
with a B&D electric trimmer, but the cord is a pain in the ass to deal
with over long distances and getting hung in the cactus.

Ive another gas trimmer, a Mitsubishi...chuckle but finding a new gas
tank for it..is impossible.


No, it's just a challenge. Adapt, Improvise, Overcome.

For the "Less Fab Time" option, an anodized aluminum quart fuel
bottle for a backpacking stove. Get an extra cap and drill a hole for
the fuel pickup hose, epoxy in a chink of brass tubing, all you need
to fab are the mounting straps.

Or weld up your own tank from a chunk of large thin-wall tubing and
weld plugs on the ends & mount tabs to bolt it to the trimmer. Gas
Cap would be a brass garden hose cap and gasket. For the fill neck
you weld a 3/4" NPT tank bung to the tank, then screw in a brass 3/4"
NPT Male to 3/4" GHT Male adapter, and a good coating of Permatex #2
on the threads.


Thats doable..might have some around here..thin wall tubing about 3"

Of course, you know about the weighted gas pickup hose dongle trick
- a round or square plate and gasket, three or four holes on the
perimeter for 6/32 screws to clamp it down to the tank body, with a
chunk of tube brazed in a hole for the double barb - inside end for
the pickup and outside for the fuel line.

Goop the screws and gasket with a bit of the Permatex #2.

You could use this pickup plate trick on the campstove bottle if you
curve it to match the bottle wall OD, and put Rivnuts in the tank wall
for the screws.

-- Bruce --



So...so much to do..so little time.

In the past..I have used an old steel military canteen with a modified
cap for a fuel tank for a small engine. Priming was problematic
though....


"Confiscating wealth from those who have earned it, inherited it,
or got lucky is never going to help 'the poor.' Poverty isn't
caused by some people having more money than others, just as obesity
isn't caused by McDonald's serving super-sized orders of French fries
Poverty, like obesity, is caused by the life choices that dictate
results." - John Tucci,