On Tue, 15 Jul 2008 01:13:51 -0700 (PDT),
wrote:

I'm currently TIGing some thin stainless (0.55mm) sheet and this
requires very low currents.

The problem I'm having is that my auto-helmet only goes down to DIN 9
and it seems way too dark.

Make sure there is no light behind you, turn out the lights in the
shop if needed. Just a little light coming in the back of the helmet
can really hurt what you see in from of you on low amp jobs.

Thank You,
Randy

Remove 333 from email address to reply.