BINGO!!!

I just got a quote from the local supplier. They come as 12 ga (.105")
wire 12 foot long in bundles of 141 pieces. I can hot saw them to either
4', 5' or 6' depending on how the project goes. They had 30,000 pieces
in stock about 4 miles from my office so turn around is not an issue.

Thanks!!!

Pete C. wrote:
RoyJ wrote:
I got a request for a couple thousand plant stakes this afternoon. They
need to be 5' long, fairly stiff but not very strong. Requester came in
with some .072 wire, not stiff enough, the .134 wire sample was over
kill. Something on the order of .109" to .125" would seem to be about
right. Galvanzied would be a plus, not required,

I don't want to deal with straightening a coil, don't want to sit and do
the cut off. Any thing come to mind where I could just buy it? I've
thought about trying to find a wire forming place, get it cut to length.
Fence place? Greenhouse supply? This would be 10,000' somewhere near 400
pounds so it would be a non trivial pile.

You might look at the pre cut galvanized steel hanger wires sold for
suspended ceiling use, I believe they are 12ga and pre cut 6' lengths.