brass
Must you WELD them together? There are many "silver solders" that melt
well below the melting point of most brasses. They can produce pretty
strong joints. If the parts weigh only a few ounces, you might get away
with a propane bottle torch (hardware store variety) and some low temp
silver solder. You will, of course need flux and a way to clean the
surfaces to be joined very well.
You should google "silver soldering" and look around. You will find
plenty of info.
Pete Stanaitis
-------------------
chip9munk wrote:
hello!
i am new to metalworking so i have a question...
what do i need to weld small brass pieces?
thanks!
|