On Sat, 14 Jun 2008 16:49:48 -0700, Jeff Liebermann wrote:

(snip)

Glue it while it's open.

(snip rest)

The most important bit of all. The solder joint should NOT be expected to
provide the mechanical support for the receptacle - only the electrical bond.
If you glue it first (with a decent material, NOT a brittle "superglue" type)
and THEN repair the solder work, you'll have a much greater chance of a long
term result. Some glues applied after soldering will actually pre-stress the
solder bonds and predispose the assembly to further failure.