DIYbanter - View Single Post

N_Cook

hr(bob) wrote in message
...
On Jun 14, 12:06 pm, "N_Cook" wrote:
Its that double sided glued foam stuff, large areas of it around the 3
sides
of the top section..
Eventually gained enough confidence to push a blade into the 3 to prize
apart.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list
onhttp://home.graffiti.net/diverse:graffiti.net/

What kind of glue will you use to push/put it back together? Some of
the glues dissolve the foam stuff.

Bob Hofmann

Probably nothing, the panel is held to the wood carcase by about 8 large
bolts and the foam must just be there for hermeticness , if thats a word and
anti-rattle.
Speaker is just 4 inches diameter , about 6W powered by a tiny surface mount
IC with no added heatsinking so hardly acoustically significant front/back
leakage I'd have thought.
This is a tiny thing , only 9x8 x 6.5 inches overall.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/