An asphalt paver in the Northern VA area just gave me a price quote of
$5,495 for applying a 2 1/2 inch layer of state approved asphalt on my
20-year old driveway with 3,285 suare feet, and I'm wondering if this
price is fair. That works out to about $1.67 per square foot. Here is
his complete proposal:

1. trim grass back along edges
2. remove loose broken asphalt as needed and patch, roll & compact (60
sf)
3. cut back existing asphalt at transition points, etc.
4. clean complete surface of dirt and debris
5. apply tack coat to bond new asphalt with old
6. even up low and uneven areas (440 sf)
7. resurface with 2 1/2 inches of SM-9.5A V-DOT state approved asphalt
machine installed with hand finished edges
8. rolled and compacted with static rollers for maximum compaction
9. handstamp edges at approx. 45 degree angle for extra support
10. widen at apron on both sides (60 sf)

The quote seems high to me, but with today's soaring oil prices, maybe
the asphalt has just gone up that much. I was budgeting for a quote
at about $3,500 only.

Thanks for any feedback.