Smitty Two wrote:

My remote for my old mitsubishi VCR had about two hundred buttons on it;
two of which selected A and B. I hate to ask, but are you sure you've
checked thoroughly for a hard key?


Hmm, what I meant was, how do you set one of the vcr's to work on B from the
remote.

Just to clarify, two same model machines (hsu790), in the same room, let's
say stacked on top of each other. Right now if you hit the power button on
the remote, both turn on, if you hit play, both go into play mode.

How do you set the vcr (either one) only to operate after B is pressed?

I don't have access to the machines and they aren't mine, was a question
posed to me over the phone last night and after searching around, couldn't
find a (free) copy of the owners manual. The person who has the machines
doesn't have a copy either. Surprisingly, even Mits website seems to only go
back to 2002 (the machines are circa 1999) even selecting the "archived"
area.

Some of the early Sony's had a physical switch (on both the machine and
remote) to use the vcr2 or B side of the remote control. Then I remembered
one NEC or Toshiba I had used some method like with the machine off and
holding down the rec key on the remote while pressing the power button on
the machine switched it to use B settings.

He said he looked everywhere on the machine for a switch and there is none,
so I'm assuming there is some "wave it over your head and cluck like a
chicken" method that isn't obvious to get the vcr itself into the B mode.

-bruce