"Ivan Vegvary" wrote in message
news:RzsJj.13$mL2.9@trndny03...
This is an art type project. I have a 4" (1/4 inch thick) piece or art
metal that I cut in the shape or a Lauburu. This is the Basque national
symbol. Sort of a swastika but with rounded lobes instead of sharp right
angles.

Anyway, I need to put three initials on it, about 3/4 inch high. Stick
welding it on would be too crude, especially considering my lack of
technique. Stamping it would not work since the biggest stamp set I own
is 3/8 inch high.

Here is one thought. Print the letters (fancy font) on paper, glue to
metal and coat the rest of the metal with some form of resist. Peel off
paper and either solder or melt lead onto the un-resistant lettered areas.
When done I could either brush it so the letters are bright, or, gild it
with gold.

Need help with resist and flux to use.

Not at all married to the above technique. ANY OTHER IDEAS would be
greatly appreciated.


Thanks,

Ivan Vegvary


What is the metal?

How prominent does the lettering need to be?