View Single Post
  #3   Report Post  
Posted to sci.electronics.repair
Dave Platt Dave Platt is offline
external usenet poster
 
Posts: 379
Default Light bulb power saver

In article ,
Silver Surfer wrote:

Does anyone recall those power saving "discs" for light bulbs they were
selling back during the oil embargo days of the 70's.


Oh, yeah, those things!

The disc was placed
in a standard light bulb fixture and the light bulb was screwed in next.
The disc was nothing more than a diode that "saved energy" by blocking power
to the bulb for half of each cycle.

Is anyone still making these things? If so, where can I buy them?


I think they've gone seriously out of favor for several reasons.
Somebody probably makes them but I don't think I've seen one in a
store in over a decade.

Disadvantages;

- They make the filament run significantly cooler, which both reduces
the absolute light output and shifts the peak of the bulb's
spectrum further towards the infra-red. I suspect that they
actually *decrease* energy efficiency, in that you get less useful
lumens-per-watt, because less of the filament's output is in the
portions of the spectrum to which the human eye is sensitive.

You're better off just buying a lower-wattage light bulb, or
(better yet) a compact fluorescent.

- They'll probably kill off halogen bulbs fairly quickly - dimming
halogen bulbs and reducing the filament temperature interferes with
the tungsten/halogen sequestration/redeposition cycle, and the
filaments burn out more quickly than they need to.

- By half-wave-rectifying the current on the line, they'll be
creating some fairly severe harmonic currents on the mains. This
results in additional losses in the power distribution system. The
utility providers *hate* harmonic currents.

- Similarly, by placing a half-wave-rectifying load on the circuit,
they'll have the effect of creating some amount of DC offset of the
voltage on the circuit. This is likely to cause buzzing of any
consumer-electronics device containing a toroidal power transformer
(e.g. some audio amps).

- I have a vague recollection that these discs were reported to have
caused overheating or fires... I'm not sure under what conditions.

--
Dave Platt AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!