On Thu, 20 Mar 2008 21:09:14 GMT, Esther & Fester Bestertester
wrote:
See no n.g. for adhesives & epoxies, so if there's a better forum for this,
just point me to it.
I need an epoxy that is strong to the point of brittle. I want no flex; it
has to transmit vibration as close to 100% as possible.
Am I looking for a high Shore Hardness value? That's what Devcon uses in its
data sheets to specify hardness.
Is this something that I can achieve by changing the mix of the 2 parts? If
so, what do I lose if I use more hardener?
Any personal experiences with epoxies that you found to be harder than
others?
Thanks.
FBt
Dunno if it's tough enough but I use GR epoxy glue from Industrial
Formulations.
24 hour cure. (Sometimes a pita.)
Here in BC.
http://www.indform.com/
"We have an epoxy system for almost any project".
Really?? :P
All I know is that GR epoxy has less flex than Lepage 2 page epoxy
(dual syringe) I got from the hardware store.
D from BC
British Columbia
Canada