Ignoramus25581 wrote:

I think that it is insane and would not do it or approve of it. Here's
the story.

There is a guy who wants to transport two pallets, with the total
weight of 5,000 lbs, in the bed of his one ton pickup truck. (100 bags
of concrete)

5,000 lbs is over 2 tons.

The truck is "one ton" truck like a Ford F-350.

Does he stand any chance at all of not breaking his pickup with a
double rated load???

i

The 1/2, 3/4 and 1 ton designations are pretty meaningless these days.
Check the actual ratings label on the door of the truck for the real
ratings. A 1T SRW and DRW have different capacities for example, though
they are both "1T" trucks. The door label will have the GVWR and axle
ratings.

In this particular case, I thin 5,000# is pushing it a bit. If the trip
is short it will probably be fine even if it is over GVWR since the
components regularly deal with shock loads higher than that. If it's a
DRW the cargo capacity is probably around 3k#-4k#, somewhat less for
SRW. Also check if the tires are of an appropriate load range, sometimes
people put tires on for looks, not load and they may not be up to the
job. Personally, I'd put one pallet in the truck and the other on a
trailer.