View Single Post
  #3   Report Post  
Posted to alt.home.repair
[email protected] trader4@optonline.net is offline
external usenet poster
 
Posts: 4,500
Default Spa / Hot Tub Controls

On Mar 4, 11:11*pm, Smitty Two wrote:
In article
,

*PLMHOA wrote:
Does anyone know of a company that makes their hot tub / spa
controller such that it can be programmed to automatically set back
(lower) the temperature should it be left on?


We are evaluating installing a community spa for our HOA and we are
concerned that someone could turn it up and leave it without turning
it back down. *It will be outside in the winter and usually only used
on the weekends and we would not like to have it automatically reset
it's temperature after a certain amount of time.


Thanks for your input.
Paul.
Pinetop, AZ


Well, Paul, put a cover on the thing, and make sure people use it. *It
takes *much* too long to heat a spa for every use. You want to keep it
at temp 24/7. Modern, well-insulated spas don't leak much heat except
when they're in use.


My spa has a built-in timer that you can set for periods when you want
the spa to come up to temp. I would think you'd find a similar
feature on many spas. However, for electrically heated spas, it
does take a couple of hours to increase the temp a reasonable amount,
like 20 degrees. So, it's useful if there are long periods when you
know it won't be used and have it cycle back up in advance, but as
Smitty says, useless for adjusting on a per use basis.